Filling works

Glätt+Füll Spackling for flattening and filling the bumps

Gypsum spattle mass, strengthened by cellulose for usage in the premises. Created smooth, flat surface for the following painting and wallpaper backing works.
Especially for flattening big surfaces and also filling the joints between gypsum cardboards.
- on the basis of natural gypsum
- high initial bondability
- doesn’t roll, dries up gradually and doesn’t shrink
- by any thickness of the layer fastens evenly and without cracks
- can be applied with the layer of any thickness and the thickness of the layer can be set up to zero
- lets in the water vapors
- can be prepared in app. 60 minutes
- consumption: 1 kg of powder for 1 m² with layer thickness 1 mm
- in a dry place expiration date isn’t limited

Füll+Finish Filling and final spackling

Gypsum spattle mass, strengthened by cellulose for usage in the premises. Created smooth, flat surface for the following painting and wallpaper backing works.
Perfectly applicable for filling the gaps and holes in the grout and brick laying, for gluing gypsum cardboards and filling the joints between them, for complete flattening of the surfaces and also for formation and modeling.
- on the basis of natural gypsum
- easily mixed, without clots
- resistance, high filling capacity and fastness of adhesion
- doesn’t swell, crack and shrink
- can be applied by layer of any thickness
- can be prepared in app. 60 minutes
- consumption: 1 kg of powder for 1 m² with thickness of applied layer 1 mm
- in a dry place expiration date isn’t limited

pufamur Super adhesive spackling SH 45

High-quality by interior finishing. Gypsum spattle mass with excellent adhesiveness, strengthened by synthetic tar.
Excellent capacity of bondability with steel concrete and other very even bases in the premises.
Отличная способность схватывания с железобетоном и другими очень гладкими основаниями внутри помещений. Fastens with any basis, including marginal.
Ideal for gluing gypsum cardboards and gypsum fibers slabs and for filling the joints between them, without gluing calico strips on the joints.
Applicable for all mineral bases for flattening big areas, filling-in the holes and cracks. Creates optimal basis for the following painting and wallpaper backing works.
- perfect adhesion
- strengthened by synthetic fibers
- can be applied with less thickness of the layer up to zero
- трещин by any thickness of the layer fastens evenly and without cracks
- can be applied with the layer of any thickness
- dries up gradually without shrinking and chalking
- can be prepared in app. 45 minutes
- consumption: 1 kg of powder for 1 m² with thickness of the layer 1 mm
- in a dry place expiration date isn’t limited
- notable good capacity of forming

рufaplast V 30 Dispersive-cement spackling

Dispersive-cement spackling mass for sweating and flattening of the facades, walls and ceilings, filling the cracks and holes and also minor repair.
- for external and internal works
- high in tar content, strengthened by fibers
- white
- perfect bondability with all types of tiles
- optimal bondability with bases, treated by dispersive materials
- the thickness of the layer can be set up to zero
- with any thickness of the layer is flexible and without cracks
- dries up gradually, without shrinking and chalking
- quick bondability- time of preparation app. 30 minutes
- expiration date minimum 48 months from the day of production

pufamur Façade Spackling for external works

For repair, flattening and creating coverings for any mineral bases, such as facades, walls and ceilings by internal and external works.
- resistant to weather conditions, applicable for dampy premises
- improved quality, due to addition of synthetic tar
- easily smoothed, can be polished by felt
- on the cement basis, white
- can be prepared in app. 30 minutes
- unfit for flattening the floors and spackling works on wood, metal, plastic and on the surfaces, painted by dispersive paints
- consumption: 1,2 kg of powder for 1 m² with thickness of the layer 1 mm

Spackling instant for internal and external works

Dispersive spackling mass ready for use for internal and external works. For flattening and applying coverings on the uneven walls and ceilings out of sectional ferroconcrete constructions, gypsum and cement grout, etc.
Creates white, smooth, well-polished and evenly absorptive surface. Unfit for the surfaces out of synthetic material and metal.
- thickness of applied layer up to 5 mm
- strengthened with fibers
- universally used
- fast and clean
- water-resistant and resistant to weather conditions
- in 400 g tube, ideal for implementing minor repair works
- for use and mustn’t be diluted
- consumption: app. 1,7 kg for м² with thickness of layer 1 mm
- expiration date minimum 48 months from the day of production

Putty for wood

Ready for use, natural brown color, on the basis of dispersion. For the correction of the damages on wooden surfaces.
- high filling capacity
- dries up evenly and without cracks
- after drying-out remains slightly elastic
- can be grinded and painted
- for internal works, but if weather-resistant covering is immediately applied on the worked-up surface, then it can be used for external works as well
- expiration date minimum 48 months from the day of production

Paint-repair fusible webbing

Glass-fiber fusible webbing for effective repair of the walls and ceilings. Bases, damaged by small cracks and also bases with rough structure or glass-fiber can become ideally even and perfectly prepared for the following works, such as painting, spackling, pasting wallpapers, grouting works and different gluing.
Perfectly applicable for gluing on the joints between gypsum cardboards.
- for internal and external works
- water- and weather-resistant
- easy to use
- 20 rolls in an advertising package
- in a dry place expiration date isn’t limited

Repair tape

Highly elastic, self-adhesive tape out of special fusible webbing for gluing small cracks on the ceilings and walls, repairing torn wallpapers with wooden fibers for painting, gluing the joints, removing the holes of nails and dowels and also for damages on gypsum cardboards and styropor. Multilaterally used before painting and gluing the wallpapers.
Length of a roll: 10 m
Width of a roll: 50 mm
- in a dry place expiration date isn’t limited

Rotrand Plaster blend for flattening walls and ceilings

For single-layer manual appliance on the walls and ceilings
- for flattening big areas on the walls and ceiling in the premises
- fits the group of solutions P IVb
- thickness of the applied layer 5 mm, average thickness 10 mm
- time of preparation 30-50 mins
- consumption: 5,5 kg for 1 m² with layer thickness 1 cm
- expiration date minimum 24 months from the date of production

Hard plaster for construction works and nonprofessional usage

Clean natural gypsum(alabaster) for modeling and repair works.
- can be prepared in app.10 mins
- in 10-15 minutes starts to harden
- expiration date minimum 24 months from the day of production



AKAPLAN Substance for flattening floors

For flattening concrete, cement and on the gypsum basis monolithic floors in the premises
- thickness of the applied layer form 1 to 10 mm
- for a layer from 10 to 20 mm the addition of glass-sand is necessary
- self-aligning
- improved by synthetic tar
- high resistance to loadings, including office furniture on the wheels
- suitable for floors with heating
- in 2 hours on can walk on the floor
- with low content of chromium in compliance with TRGS 613
- for internal works
- time of usage: app. 30 minutes
- consumption: app. 1,5 kg/m² by applying the layer 1 mm

DALI® FACADE ACRYLIC LEVELLING FILLER

Purpose:
  • - leveling of surface before deposition of finishing materials
  • - filling of joints and elimination of surface defects